The M12 FORCE LOGIC Press Tool is the single lightest press tool in the market today and represents a new level in portability and accessibility around installed pipes. Featuring a one-handed, in-line design, the M12 FORCE LOGIC Press Tool will operate nearly anywhere you can fit your arm. Utilizing Milwaukee REDLINK Electronics, the M12 FORCE LOGIC Press Tool monitors the force output to ensure quality connections and provides the user peace of mind by visually indicating when a secure connection is made and when the tool needs calibration. Featuring the best calibration standard in the industry, the Tool Only requires service every 32000 crimps. This allows users up to 4x more connections between services, keeping the tool on the jobsite up to 4x longer than competitive units.
Powered by the M12 Red Lithium battery means this is the only press system where you can cut, fasten and connect on one system. Features:. Features the best calibration standard in the industry. Batteries recharge in 30 minutes. Cut, fasten and connect all on one system. Compatible with all M12 batteries and chargers.
Performs 32,000 crimps between service inspections. Can be operated with one hand while delivering up to 5400 lbs. Of force. Please note: Accommodates M12 1-1/4 in. Press jaw - (sold separately).
5-year tool warranty; 2-year battery/charger/jaw warranty. Part of the M12 System of over 90 tools. Series:M12Cordless:YesLength:12.6 in.Width:2.75 in.Weight:3.8 lbs.Amp Hour:1.5 AhBatteries Included:2Battery System:M12Battery Type:Li-IonBattery Warranty:2 YearBluetooth Compatibility:NoCase Included:YesCase Type:HardCharge Time:30minCharger Included:YesCorded/Cordless:CordlessCycle Time:5secJaw Capacity:1/2 in - 1-1/4 in CUJaw Warranty:2yrsLong Throw:NoMotor Type:BrushedNo. Of Jaws Included:3Powered Tool Power Source:Electric - CordlessShort Throw:NoVoltage:12VWifi compatibility:No. I started my plumbing career in 1977 lead, galvanized, brss, copper so when I retire I need to replace the galvanize pipes to copper, in my parent's house my plans was to sweat pipes.
So I called a plumber to give me a price the price was $1500. Ok cool so he removed the galvanize pipes and used copper & press fitting valves & press fitting elbows and tees.
I was very impressed the way the tool works.He had a 18 volt Milwaukee press pressure tool I liked the tool I know I will not use the tool every day just once and a while so I invested in the 12volt tool, I have a gate valve in my home I unsweated the valve and install a 3/4 press pressure valve the tool works great I wish I learned about the tool sooner, I would have done the work myself. Factory-Reconditioned products have been returned to the manufacturer and are restored to like-new operating condition; they go through a rigorous testing and inspection process. Car hoppers backseat edition nathan. Plus, they offer a significant savings vs. New.
Reconditioned products may have minor cosmetic blemishes or scratches that do not affect item performance. Reconditioned products may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.). Both come with a manufacturer warranty and are covered by our; New is 30 days, Reconditioned is 120 days. Condition:NewFactory ReconditionedFeatures:SameSameSpecs:SameSameIncludes:M12 Cordless Li-Ion FORCE LOGIC Press Tool - 2473-20, 2) M12 REDLITHIUM CP1.5 Ah Battery -, 1/2 in. Jaw -, 3/4 in.
Jaw -, M12 Lithium-Ion Battery Charger -, Carrying CaseM12 12V Cordless Lithium-Ion FORCE LOGIC Press Tool - 2473-80, (2) M12 REDLITHIUM CP1.5 Ah Battery -, 1/2 in. Jaw -, 3/4 in. Jaw -, M12 Lithium-Ion Battery Charger -, Carrying CaseAvailability:In StockOut of StockWarranty:5 Year1 Year.
. MILWAUKEE. Zoro #: G7370636 Mfr #: 2773-22.The industry’s first inline brushless press tool, the M18™ Force Logic™ press tool is the smallest, most intelligent press tool on the market. This state of the art technology enables 20% more run time per charge, 10% faster cycle time, and the single longest calibration interval in the industry at 50, 000 cycles, all while being significantly smaller and over 20% lighter than the leading competitor. Like all Milwaukee press tools, the exclusive in-line design with a forward hand position unlocks the ability to press with one hand and will fit anywhere the user can fit their arm. The M18™ Force Logic™ press tool provides the highest level of press accuracy and reliability available in the industry.
Auto-cycle ensures a full press every time and a pre-press battery check ensures the tool won’t start a press it can’t complete, giving peace of mind in quality connections. Compatible with over 13 unique fitting systems, and 1/2 in. Capacity, the M18™ Force Logic™ press tool is a comprehensive press solution for plumbers and mechanical contractors.
Enter Product Quantityqty.The industry’s first inline brushless press tool, the M18™ Force Logic™ press tool is the smallest, most intelligent press tool on the market. This state of the art technology enables 20% more run time per charge, 10% faster cycle time, and the single longest calibration interval in the industry at 50, 000 cycles, all while being significantly smaller and over 20% lighter than the leading competitor. Like all Milwaukee press tools, the exclusive in-line design with a forward hand position unlocks the ability to press with one hand and will fit anywhere the user can fit their arm. The M18™ Force Logic™ press tool provides the highest level of press accuracy and reliability available in the industry.
Auto-cycle ensures a full press every time and a pre-press battery check ensures the tool won’t start a press it can’t complete, giving peace of mind in quality connections. Compatible with over 13 unique fitting systems, and 1/2 in. Capacity, the M18™ Force Logic™ press tool is a comprehensive press solution for plumbers and mechanical contractors. RIDGID. Zoro #: G2477951 Mfr #: RP-241.Press Tool Kit, Battery Included, Voltage 12.0, Press Tool Jaw/Pipe Capacity 1/2 In. To 1-1/4 In., Use With Pipe/Tubing Material Copper, Crimping Force 1.2 tons, Approximate Cycle Time 5.0 sec., Cordless Tool Battery Type Li-Ion, RIDGID Series, Brushless Motor No, Tool Length 15-7/8 In., Auto-Cycle Yes, Pre-Press Battery Check Yes, Calibration Interval 32, 000 Cycles, Battery Included (2) 54HT32, Battery Pack Replacement 54HT32, Battery Capacity 2.5Ah, Tool Weight 6 lb., Features In-Line Design.
Ridgid Propress Tool Calibration Tracking System
Enter Product Quantityqty.Press Tool Kit, Battery Included, Voltage 12.0, Press Tool Jaw/Pipe Capacity 1/2 In. To 1-1/4 In., Use With Pipe/Tubing Material Copper, Crimping Force 1.2 tons, Approximate Cycle Time 5.0 sec., Cordless Tool Battery Type Li-Ion, RIDGID Series, Brushless Motor No, Tool Length 15-7/8 In., Auto-Cycle Yes, Pre-Press Battery Check Yes, Calibration Interval 32, 000 Cycles, Battery Included (2) 54HT32, Battery Pack Replacement 54HT32, Battery Capacity 2.5Ah, Tool Weight 6 lb., Features In-Line Design. MILWAUKEE. Zoro #: G7370645 Mfr #: 2473-22.Force Logic™ press tools the smallest, lightest and most intelligent solution for press connections of copper and steel pipe.
Featuring a one-handed, in-line design, the new press tools not only offer the most ergonomic solution for navigating around installed pipes, but also deliver on the highest level of press accuracy and reliability available on the market. Utilizing Milwaukee® REDLITHIUM™ electronics, the Force Logic™ press tools monitor the force output to ensure quality connections and provide the user peace of mind by visually indicating both a secure connection and when the tool needs calibration.
Featuring the best calibration standard in the industry, the new tools only require service every 40, 000 crimps. This allows users up to 4X more connections between services, keeping the tool on the jobsite (making money) up to 4X longer than competitive units. Enter Product Quantityqty.Force Logic™ press tools the smallest, lightest and most intelligent solution for press connections of copper and steel pipe. Featuring a one-handed, in-line design, the new press tools not only offer the most ergonomic solution for navigating around installed pipes, but also deliver on the highest level of press accuracy and reliability available on the market. Utilizing Milwaukee® REDLITHIUM™ electronics, the Force Logic™ press tools monitor the force output to ensure quality connections and provide the user peace of mind by visually indicating both a secure connection and when the tool needs calibration. Featuring the best calibration standard in the industry, the new tools only require service every 40, 000 crimps. This allows users up to 4X more connections between services, keeping the tool on the jobsite (making money) up to 4X longer than competitive units.
.Part of thebook series (LNCS, volume 8498) AbstractInstrument localization and tracking is an important challenge for advanced computer assisted techniques in minimally invasive surgery and image-based solutions to instrument localization can provide a non-invasive, low cost solution. In this study, we present a novel algorithm capable of recovering the 3D pose of laparoscopic surgical instruments combining constraints from a classification algorithm, multiple point features, stereo views (when available) and a linear motion model to robustly track the tool in surgical videos. We demonstrate the improved robustness and performance of our algorithm with optically tracked ground truth and additionally qualitatively demonstrate its performance on in vivo images.
We recently piped a hot water (heating Job) using propress. I should note that we own 3 propress tools (1battery and two cord) and have propressed every size from 1/2' -4'. We have been propressing for about 4 years and no one has EVER had a leak on a propress fitting-until now. Every one of our fitters likes propress.The job we just completed had 3/4, 1, 1 1/4, 1 1/2 and 2 ' propress fittings.After finishing the piping we air tested at 100 psi with air. To our suprise we had a lot of leaks on the 2' propress fittings.This is very disturbing. I will mention that the copper tubing supplied to us was all American with the exeption of the 2' tubing that was made in Great Britian.
We cut out the leaks and made the repairs with soldered fittings (our feeling was that if there was some kind of compatability issue why propress it again and risk leaks and wasted fittings) We left the system with pressure over this weekend and will check it tommorrow. It seems to hold pressure now and so far the only leaks on propress have been the 2'.I have saved the old leaking fittings and pipe and would like to have someone inspect this if possible. We did notice that some of the 2' tubing was slightly out of round but had no problem installing the fittings.I plan to mic the tubing to check the size and talk with our supplier about this as the same supplier provided the propress fittings and tubing. I have yet to inspect the fittings and tubing but will be doing this as well.
I believe all these joints were pressed with the battery tool.We need to have someone follow through on this as this job will probably be all propress but this issue needs to be resolved. I will probably call tech support tommorrrow.Thanks,Ed. Eddie, i have 4 machines and 2 sets of xl jaws. It is 1 of 2 things.
You mentioned that the 2' copper was made in great brittan. You also mentioned that the 2' was pressed with the cordless #320 machine.i'm not too sure if the copper from brittan has an american size of 2.125' od. Typically they work in metric which would be approx. Slightly smaller than 2.125' 2.125' = 51.117mm.the other issue would be the jaws on the 320 being dirty or worn. You should have been able to recrimp the leaking fittings with the other corded machines or different jaws. This would have fixed the possible jaw issue.so my opinion has to do with the british copper.pay back time for the spilt tealet me know if that's correct. What does the tubing have stamped on the wall, and what type is it m,l,k.ps.
Propress is not recommended for soft copper over 1.25'i've only had 1 issue with a machine. It was a 2' press and the roller broke in the housing. That's the reason why i have 2 with me on a 1 shot planed shut down.ridgid replaced the whole front of the machine, just like newrick. We repressed a few of the joints with the cord machine.
Ridgid Propress Tool Calibration Tracking Device
This didnt help. They were originally pressed with the battery machine.
I will follow up on this when it gets resolved. The copper was marked type L. We only had 1 other issue with Propress.
When our battery machine was 1 month old it went up in smoke. We sent it back and it was repaired pretty quickly.
One of our guys was 50 miles from the shop without another machine had already cut into a pipe and had water leaking by a valve (not much as luck would have it). Good thing our other machine was at the shop and someone ran it out to him. He had his finger in the dike.Ed. Hi Ed,At first glance it does sound like the 2' tubing could have something to do with the problems you encountered, but we'll need to do some further investigation before we can be certain.
Please do call in to Tech Service and ask for Jeff. He will get more information from you and if possible ask that you supply us with the jaw, some of the pressed fittings that you cut out, as well as some of the tubing. We'll do a full inspection on each component and get back to you within a few days. We appreciate your commitment to the ProPress system and will work with you to get to get to the bottom of this issue as quickly as possible.Rick H.
UpdateI'll start off by introducing myself. I am Jeff in the Technical Service Department at Ridge Tool Company. I am the Jeff that has been referred to previously.I do not want to get into all the details at this time because of an unfinished report, but will give some updates. The tool, jaws, fittings, pipe are still in the process of inspection.
We have inspected the tool and jaws and have forwarded the fittings and tube over to Viega for further evaluation. Once they get an opportunity to complete their investigation of the fittings/tube we will converse and reply back to the end user with our findings. I have contacted the end user and have kept them informed as to where this investigation is at. Thank you all.jeff.
As Jeff mentioned in the above post, the battery propress tool was sent back to Ridgid and the calibration and jaws checked and found to be ok. The tubing and fittings were checked by Viega.There were several leaks. One of the leaks was caused by scratches in the tubing of the type caused by dragging the tubing on a concrete floor.
The other leaks were caused by a larger than normal seam which caused a bump in the tubing that the propress couldn't seal and the leaks were caused by this 'laped seam' per Viega.We are presently continuing with this large job and have a lot of tubing which we are propressing 3/4' up to 3' and have every confidence that this issue has been resolved.I would like to thank Ridgid and Viega for addressing this issue and resolving it promptly.When we ordered the last batch of tubing from our supplier we specified 'american tubing' but the whole order showed up with the 'Great Britain ' tubing. Terminator genisys 2015 download utorrent for free. We refused delivery and sent it back without unloading it from the truck.Wh0 knows if we just had a bad few sticks of tubing or what??
But we decided not to take a chance. We did measure the 2' tubing ad it was 2 1/8' OD and carried the standard ASTM numbers and Type L tubing markings.ED.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |